High quality sludge dewatering centrifuge company supplier: The use of three-phase separation technologies is rising in the separation industry. When it came to separating oils and water, the industry particularly needed high-efficiency three-phase decanter centrifuges. Shenzhou Machinery Company has over 50 years of experience in the separation field, which they used to develop the 3 Phase decanter centrifuge. Its primary use is in solving the problem of simultaneous immiscible liquid and solid phase separation using the specific gravity difference. The need for stable, continuous operation around the clock can be met by the 3 Phase decanter centrifuge thanks to its mature design and high-quality raw material selection. Discover extra details on https://www.lnszjx.com/products-42929.
The most important factor to keep in mind when manufacturing decanter centrifuge components or designing a completely new decanter assembly using a cone centrifuge parts casting machine is that the decanter bowl and tube wall thickness must be thin enough to meet design specifications while still providing each Structural integrity required for components. Stainless steel cylinders and conical bowls for decanter centrifuges are manufactured from the centrifugal casting process. Decanter Bowls, Bowl Cones, and Bowl Cylinders are typically made in various dimensions through centrifugal casting and additional machining. These can be purchased as a single part or already assembled/welded with a stainless-steel cylinder.
The variable pump impeller technology can adjust the thickness of the liquid layer inside the machine while it is running, so that the Decanter centrifuge can be quickly adjusted without stopping to achieve separation effect. New independent drive system. The structural feature of the new independent drive system is that the drive of the rotary cylinder and the screw are respectively driven by two vertical variable frequency motors. A new type of gearbox is used to connect the drum and the screw. In addition to withstanding high torque, this gearbox can also independently rotate the screw without the drum rotating. Through the above discussion and analysis, it is not difficult to see that the influence of structural design on the processing capacity of decanter centrifuge is mainly reflected in the selection and design of mechanical parameters and corresponding auxiliary equipment. If each problem is considered comprehensively and concretely, it can also be considered comprehensively and concretely. The decanter centrifuge can better serve the solid-liquid separation field of various industries in our country.
The fundamental principles of operation for the 2 phase decanter centrifuge and 3-phase Shenzhou Machinery decanter centrifuges are identical to those of the horizontal decanter centrifuge. To separate substances with different densities, the equipment uses a high-speed rotating assembly to create an acceleration inside the bowl that is thousands of times stronger than gravity. Then, the relative motion between the bowl and the screw is generated by the differential gearbox, allowing for the separation of the substances. In contrast, 3 phase decanter centrifuges use centripetal pump technology to achieve solid-liquid-liquid three-phase separation, as opposed to Shenzhou Machinery 2-phase centrifuges, which are utilized for solid-liquid two-phase separation and discharge the solid slag and separation liquid from an opening at the bottom of the equipment collection box. Under the pressure of the centripetal pump, the heavy liquid phase is discharged through the flow outlet on the impeller. In contrast, gravity sends the solid slag and light liquid phase down from the bottom opening of the equipment collection box.
High Speed Tubular Centrifuge, also called Tubular Bowl Separator or tubular bowl centrifuge, is a kind of fine separation equipment suitable for suspensions with thin concentration, fine particles, and small density difference solid-liquid separation, or liquid-liquid-solid separation. It is indispensable equipment for pharmaceutical, food, chemical, biological product, fermentation broth, beverages, blood products and other industries. High Speed Tubular Centrifuge working principle is that materials with different specific gravity are subject to different centrifugal forces when rotating at high speed, so as to achieve the purpose of separation. Find even more information at https://www.lnszjx.com/.
The structure and working principle of a Decanter centrifuge – The Decanter centrifuge relies on the density difference between solid and liquid phases, and under the action of centrifugal force, accelerates the settling speed of solid particles to achieve solid-liquid separation. There is a conical section designed in front of the drum, which rotates at a set speed according to the different properties of the material. The material rotates at the design speed on the inner wall of the drum, forming a concentric liquid layer along the drum shell, called the liquid ring layer. The solids contained in the material are deposited onto the wall of the drum under the action of centrifugal force, and then the dry material is pushed out of the drum through spiral operation. The operating speed of the drum directly determines the separation factor, while the speed difference of the screw directly affects the solid moisture content transported outside the drum. It has a direct impact on processing capacity, residence time, and solid discharge.