Best ignition coil factory in China? The car coil itself is a transformer, which is like a transformer in a household appliance. When the voltage changes within a specified range, the transformer will not be burned. Usually, the burning of the transformer occurs when the transformer is overloaded. When solving this problem, we must try to find out the cause of the excessive load or the aging of the components. If there is no fire or weak sparks that suddenly occur during driving, an infrared thermometer or hand touch can be used to determine whether the car coil or the ignition module has an internal short circuit or open circuit fault. When the fault is judged, it can also be restarted. Read more information on ignition coil supplier. The quality of Haiyan car ignition coil/ automotive ignition coil is guaranteed.
The primary winding of an ignition coil will typically contain 150 to 300 turns of wire; the secondary winding will typically contain 15,000 to 30,000 turns of wire, or around 100 times more than the primary winding. The magnetic field is initially created when the vehicle’s electrical system applies approximately 12 volts to the ignition coil’s primary winding. When a spark is required at a spark plug, the ignition system will switch off the current flow to the primary winding, which will cause the magnetic field to collapse. The collapsing magnetic field will induce a voltage into the primary winding in the region of 200 volts; but the voltage induced into the secondary winding will be approximately 100 times greater, around 20,000 volts.
The first coil-based ignition system is credited to the American inventor Charles Kettering, who developed a coil ignition system for a major vehicle manufacturer around 1910/1911. For the first time, he devised an electrical system that powered the starter motor and ignition at the same time. The battery, a generator and a more complete vehicle electrical system provided a relatively stable electrical supply to the ignition coil. The Kettering system used a single ignition coil to produce a high voltage, which was passed to a rotor arm that effectively pointed the voltage to a series of electrical contacts located in the distributor assembly (one contact for each cylinder). These contacts were then connected by spark plug wires to the spark plugs in a sequence that made it possible to distribute the high voltage to the spark plugs in the correct cylinder firing order.
The hardware accessories series is available in a wide range of types and specifications. Haiyan hardware accessories manufacturer carries out strict quality monitoring and cost control on each production link of hardware accessories, from raw material purchase, production and processing and finished product delivery to packaging and transportation. This effectively ensures the production of hardware accessories manufacturer has better quality and more favourable prices than other products in the industry. See even more details at https://www.hj-auto.com/.
Haiyan car ignition coil suppliers have 200 workers, around 170 work over 4 years, with an independent long-term workflow and productivity, have one department including 30 products technology development and research. Our automotive ignition coil manufacturers cover over 14000 square meters, have been awarded city contracts and keeping promises to units, also we certify ISO9001, and TS16949 for a quality system, truly achieving the quality first, reputation first quality service for our customers at home and abroad. Kindly welcome domestic and overseas patrons to come and guide.