High quality casting wheel supplier: Why get alloy wheels? Alloy wheels do come with a LOT of key benefits that go beyond the obvious cosmetic appeal. They last longer, look better, and help your car perform better across all important performance measures. First, they dissipate heat a lot better. This may seem trivial, but it means that they remain cooler when driving, and that in turn produces much less wear and tear on the tyres. As the tyres last longer, there are obvious performance and economical benefits, needing to replace tyres less frequently. Also, alloy wheels are completely airtight. This makes them excellent for tubeless tyres and gives them a major advantage over steel wheels. Most steel wheels result in tiny losses of tyre pressure, which may seem insignificant but they add up over time. See extra information on custom alloys supplier.
Revolutionize Your Ride: Expert Wheel Installation Tips! During the wheel installation process, the following points need to be noted: Select the right wheel: Before installation, make sure the wheel selected matches the vehicle model and specifications. Different vehicle models may have different wheel sizes, number of bolt holes and offset requirements. Improperly fitted wheels may cause installation problems or affect driving performance. CLEAN WHEELS AND MOUNTING SURFACES: Thoroughly clean the wheels and mounting surfaces before installing the wheels. Use a cleaner or high-pressure water gun to remove dirt and grease from the surface to ensure the wheel is securely mounted.
To sum up, it can be concluded that aluminum wheels are the product of “high-speed”, “energy-saving” and “modern fashion” of automobiles. With the rapid development and development of the automobile market, aluminum wheels are used to gradually replace the traditional steel ring. The trend has become more and more intense, and there is an infinitely broad market prospect. Many people usually choose a wheel that is larger than the original product when buying a new wheel. The first thing to pay attention to is that the tire and the wheel are two inseparable parts. During the modification process, try to keep the extension diameter of the tire. It is necessary to remain unchanged or to keep the changes as small as possible. One of the main reasons is that if the deviation is too large, the accuracy of the meter will be problematic. It’s not feasible to just increase the wheel size without changing the tires. For example, if the tire size of the original car is 215/60R16 (16 means 16-inch wheels), then if you change to 17-inch wheels, the new tire size should preferably be 225/55R17, or 225/50R17. Discover even more details on jjjwheel.com.
The Flow-Forming Process: A Quick Overview: The flow-forming process is a manufacturing technology used to produce high-performance wheels. Using heat and pressure, the inner barrel of a cast wheel is stretched and compressed, enhancing its tensile strength and durability. Flow-formed wheels are an ideal option for car enthusiasts who want the style and strength of forged wheels but do not have the budget for them. With a combination of superb design options and affordability, flow-formed wheels offer an exceptional solution for performance enthusiasts. Additionally, their elongation characteristics and superior shock resistance make them a superior choice over traditional cast wheels. In sum, the flow-forming process is changing the game in the wheel industry as we know it.
Jiangjin science and technology is a global leading wholesale alloy wheels manufacturer. JWHEEL alloy wheels wholesale company is located in Guangdong, Hong Kong and Macao Bay Area, an important node city of Jiangmen. With modern production facilities, we adopt the industry’s advanced casting, machining, painting and inspection equipment, equipped with automatic robots throughout the process, and with ERP system and other advanced management means, to create the industry benchmark for hardware, software and product quality. As we are also a wholesale alloy wheels manufacturer and supplier, we welcome bulk order inquiries.
Fuel vehicle: If you use fully synthetic engine oil, a small maintenance every 10,000 kilometers, a single cost of 600 dollar, then 100,000 kilometers need to be maintained 10 times, the total cost is 6,000 dollar, a major maintenance every 30,000 kilometers, a major maintenance Counting 1,000, 100,000 kilometers of maintenance 3 times, the cost is 3,000, so calculated, the total maintenance cost of 100,000 kilometers is 9,000 dollar.
Low-pressure casting: It is more advanced compared to gravity casting. Although it is also formed by pouring high-temperature liquid metal into the mold and cooling it, the metal molecular density will be higher with the help of constant pressure and the wheel will have higher strength after forming because of the use of low-pressure nitrogen propulsion to accelerate the filling of the mold. The whole process is mechanized, so the level of craftsmanship is stable. This process is usually used for most of the original matching wheels for vehicles today.Jiangjin Wheel is a professional aluminum alloy wheels suppliers,specialized in low pressure casting wheels.
We not only have the traditional low-pressure casting technology, but also have the high strength and light weight manufacturing technology of “low-pressure casting + spinning”. We always maintain various advanced technology advantages in aluminum alloy wheel manufacturing to meet customers’ needs and lead the industry development. The formula has perfect testing equipment, including material testing machine, hardness tester, solid aluminum alloy containing slag quantitative tester, X-ray diffractometer, bending fatigue tester, radial fatigue tester, biaxial fatigue tester, 13° impact tester, 30°/90° impact tester, salt spray test chamber, humidity and heat test chamber, etc., which can carry out the four major testing areas of wheels (dimensional testing, alloy material performance, reliability and safety, coating.
Mistake : the larger the size of the wheel, the better. Many people modify the original intention of the hub is actually simple and rough: good look! The wheel size is larger, the vehicle effect looks bigger, more powerful. To be frank, it’s even higher! But blindly increase the size of the wheel hub,calipers, baffle, suspension system is easy to hit, even lead to heavy damage the vehicle suspension system and increase fuel consumption. General conventional wheel hub modification or upgrade to a maximum of 2 inches is appropriate, but also pay attention to the collocation of tire specifications, tire diameter change <3%. Otherwise it will affect the accuracy of the code table, even may receive a lot of tickets for no reason.