Power press machine manufacturer and supplier by pressmachine-world.com? Structures of hydraulic press brake machinesThe hydraulic press brake is an important equipment for the bending and forming of wokieces in the shet meta instry It functionis to press the telplate into parts of various shapes according to the process requirements. The frame is mainly composed of lf an right columns, wokbenches, and beams. Teleft and right oil cylinders are ied on th colms. The slider is connected with the pistons of th oil cylinders. The lower mold is tixed on the worktable. The upper punches are installed athe lower end of the slider. The hydraulic system provides power, and the electrical system gives instructions. Under the action of the oil cylinder, the slider drives the upper mold downwards and closes the lower mold to realize the folding of the sheet. The lett andrght columns, the workbench and the sliding block hereinafter refere to as h three major parts)are the key parts of the bending machne. The tl weighto te three major parts accounts for 70% to 80% of the total weight of a bending machine. Its strength and rigidit directy determine the operating accuracy, service life of the machine tool, and the ccuracy of the workpiece. Find additional info on world press machine.
Even if there are shelves full of molds, don’t assume that these molds are suitable for the newly purchased machine. The wear of each mold must be checked by measuring the length from the front end of the punch to the shoulder and the length between the shoulder of the female mold. For conventional ols, the deviation per foot should be about t0.001 inches, and the total length deviation should not be greater than t0.005 inches. As for the precision grinding mld, the accuracy per foot should be ±0.0004 inches, and the total accuracy should not be greater than ±0.002 inches. It is best to use fine grinding molds for CNC bending machines, and conventional molds for manual bending machines.
Through this partnership of shared experience and ideas, we are confident that we can realize your current and future requirements on WORLD press machine. Fast delivery standard machines stock for sale: Standard C frame single crank press and eccentric press are always some units stocking for sale. 2 weeks to 30 days lead time for customized order. Big press line such as car body parts stamping line could be ready for shipment within 4 months after order.
Under the same load, the deflection of the worktable and sliding block of the 10-foot machine is 4 times that of the 5-foot machine. This means that shorter machines require fewer shim adjustments to produce qualified parts. Reduced shim adjustment and shortened preparation time. Material grade is als a key factor. Compared with low-arbon sel, the load required by stailes stee is usuall increasedby about 50%, while most grades of soft aluminum are reduced by about 50%. You can get the machine’s tonnage table from the bending machine manufacturer at any time. The table shows the estimated tonnage required per foot length unde diffrent thicknesses and different materials.
World Precise Machinery (China) is the biggest branch factory of World Group which is focusing on producing and technology researching of power press machines. The original factory was built in 1953 to produce small eccentric punching machines for new China industry. World Group bought this factory in 1998 and expanded the production capacity and the product ranges. Now World can supply power press capacity from 6.3ton to 2500ton, C fame and H frame crank press, tie-rod and mono block type eccentric gear press, hydraulic shearing machine and bending machine (press brake), fiber laser cutting machine and the automatic accessories such as decoiler, straightening machine and roller NC feeder. Find extra information at pressmachine-world.com.